September 2017
M T W T F S S
« Sep    
 123
45678910
11121314151617
18192021222324
252627282930  

Drill Core

The Core Drilling for Masonry Guidelines

Cutting large holes using core drills on walls, ceiling, floors and other concrete materials is called core drilling. Core drill use bits that are made of hollow cylinder with square teeth and an enclosed top that attaches on the tip of the drill. This is a common tool in the mining industry, a tool made mode for exploration. Today, core drilling is also used for masonry. Core drilling can be done easier with following the provided guidelines.

1. Select the right size of core drill to be used for the cut to be done. A common size for masonry for pipe, duct and cable is 55mm. For the bathroom pipe waste, you can chose 40mm-107mm.

2. Before you start drilling, ensure first that there are no pipes, wirings, cables, gas pipes that surrounds the area you are about to drill. Normally they are buried inside your walls so make sure to detect these hindrances by a good cable or pipe detector.

3. High powered SDS drills makes core drilling possible. These drills has safety clutch that helps lessen the risk of harm during operation. Core drills are investments. They are quite pricey so if you are planning to have one, be sure to buy original and durable high performing core drill power tools. These core drills performs faster with high power wattage. If you are selecting bits, use diamond core bits.

4. Focus on the cut during the operation. You will be unaware how fast your wrist and hands can affect when the
core drill
snags at any moment without notice and unexpected.

5. Do not use a hammer when you are doing the core drill. Core drilling operation should be treated with ease and smooth. The hammers can break and snap the core drill bits easily.

6. Start drilling right way through the concrete if you already ensure there are no detected cables inside. Once you got the cut, stop the drill and remove by pulling the drill from the center of the core.

7. Always be reminded that the machine can jam unexpectedly so better make use of the safety clutch.

If you are looking for other tools suited for masonry, visit sydneytools.com.au and see the wide array selection from power tools to hand tools.

Find Drill Core On eBay Below:

NEW 15 Diamond WET Coring Bit Concrete Core Drill by BLUEROCK  Tools
NEW 15 Diamond WET Coring Bit Concrete Core Drill by BLUEROCK Tools
$37.00
Concord Blades CBW01500SP 1 1 2 Inch Wet Concrete Diamond Core Drill Bit
Concord Blades CBW01500SP 1 1 2 Inch Wet Concrete Diamond Core Drill Bit
$47.00
8pcHoleHog Core Drill Bit Reamer w Pilot Drill Set  21pc Drill Set SPECIAL DEAL
8pcHoleHog Core Drill Bit Reamer w Pilot Drill Set 21pc Drill Set SPECIAL DEAL
$224.95
Diamant Boart Core Drill Hilti Weak DK P N 174533
Diamant Boart Core Drill Hilti Weak DK P N 174533
$699.00
BLUEROCK  TOOLS 10 Z 1RB CONCRETE CORE DRILL w ROLLING BASE PACKAGE DEAL
BLUEROCK TOOLS 10 Z 1RB CONCRETE CORE DRILL w ROLLING BASE PACKAGE DEAL
$1,799.00
 Hilti Y BK50 2 Diameter 3 8 Center SDS Max Hammer Drill Core Bit
Hilti Y BK50 2 Diameter 3 8 Center SDS Max Hammer Drill Core Bit
$124.99
CONCRETE CORING 10 BLUEROCK  Z 1RB CORE DRILL 2 SPEED W STAND
CONCRETE CORING 10 BLUEROCK Z 1RB CORE DRILL 2 SPEED W STAND
$1,198.00
10 BLUEROCK  Z1RB CORE DRILL 2 SPEED WITH ROLLING BASE STAND CONCRETE CORING
10 BLUEROCK Z1RB CORE DRILL 2 SPEED WITH ROLLING BASE STAND CONCRETE CORING
$1,099.00
NEW Hilti DD B BI 18 320 P4 11 16 DIAMOND CORE BIT 12 370300 6 FOR DD DRILL
NEW Hilti DD B BI 18 320 P4 11 16 DIAMOND CORE BIT 12 370300 6 FOR DD DRILL
$79.99
Steel Dragon Tools 1 25 mm Wet Diamond Concrete Core Drill Bit
Steel Dragon Tools 1 25 mm Wet Diamond Concrete Core Drill Bit
$40.99
NEW 6 Diamond WET Coring Bit For Concrete Core Drill by BLUEROCK  Tools
NEW 6 Diamond WET Coring Bit For Concrete Core Drill by BLUEROCK Tools
$119.00
2x Core Drill Bit Adapter 5 8 11 UNC Thread Male 3 8 Shank Concrete Drill
2x Core Drill Bit Adapter 5 8 11 UNC Thread Male 3 8 Shank Concrete Drill
$21.95
1 5 8 inch diamond core bit for wet dry drilling concrete and asphalt 5 8 11
1 5 8 inch diamond core bit for wet dry drilling concrete and asphalt 5 8 11
$56.90
Concord Blades CBW02500SP 2 1 2 Inch Wet Concrete Diamond Core Drill Bit
Concord Blades CBW02500SP 2 1 2 Inch Wet Concrete Diamond Core Drill Bit
$100.56
Hilti Dd150 u Dd 150 U Hand Held Wet Core Drill
Hilti Dd150 u Dd 150 U Hand Held Wet Core Drill
$599.99
Hilti DD150U Wet Dry Diamond Core Drill Rig Electric 110V Drilling Tool bidadoo
Hilti DD150U Wet Dry Diamond Core Drill Rig Electric 110V Drilling Tool bidadoo
$499.95
MK Diamond 156316 1 3 4 5000 1600 Max Min RPM Masonry Dry Drilling Core Bit
MK Diamond 156316 1 3 4 5000 1600 Max Min RPM Masonry Dry Drilling Core Bit
$39.99
2 3 4 MASONRY CONCRETE CORE HAMMER DRILL BIT SDS Max
2 3 4 MASONRY CONCRETE CORE HAMMER DRILL BIT SDS Max
$42.00
BD drill bit Tilden and Cycle Core core drill bits  1420 1
BD drill bit Tilden and Cycle Core core drill bits 1420 1
$18.00
Wet Granite Concrete sander 1 1 2 40mm Half Bullnose Diamond core drill bit pad
Wet Granite Concrete sander 1 1 2 40mm Half Bullnose Diamond core drill bit pad
$244.99
Wet Granite Concrete sander 3 8 3 4 Half Bullnose Diamond core drill bit pad
Wet Granite Concrete sander 3 8 3 4 Half Bullnose Diamond core drill bit pad
$248.99
10PCS 6mm 1 4 inch Diamond Coated Core Drill Bit Hole Saw Glass Ceramic Tile
10PCS 6mm 1 4 inch Diamond Coated Core Drill Bit Hole Saw Glass Ceramic Tile
$0.99
BLUEROCK Tools 12Z1 LRBTS CORE DRILL 2 SPEED W TILTING STAND CONCRETE CORING
BLUEROCK Tools 12Z1 LRBTS CORE DRILL 2 SPEED W TILTING STAND CONCRETE CORING
$1,145.00
NEW 11 Diamond WET Coring Bit For Concrete Core Drill by BLUEROCK  Tools
NEW 11 Diamond WET Coring Bit For Concrete Core Drill by BLUEROCK Tools
$289.00
1pc 350mm Long SDS Max Core Shank Drill Arbor for Wall Concrete Drill Holesaw US
1pc 350mm Long SDS Max Core Shank Drill Arbor for Wall Concrete Drill Holesaw US
$25.00
Dry and Wet Diamond Core Drill Bit 1 x 157 O8Y6
Dry and Wet Diamond Core Drill Bit 1 x 157 O8Y6
$31.46
Dry and Wet Diamond Core Drill Bit 13 x 157 D5H6
Dry and Wet Diamond Core Drill Bit 13 x 157 D5H6
$30.00
4 Z 1 CORE DRILL 2 SPEED CONCRETE CORING DRILL by BLUEROCK  TOOLS Z1
4 Z 1 CORE DRILL 2 SPEED CONCRETE CORING DRILL by BLUEROCK TOOLS Z1
$238.00
2 PIECES CORE DRILL ADAPTER HILTI DD BU 1 2 BSP FEMALE FOR HILTI DD 160
2 PIECES CORE DRILL ADAPTER HILTI DD BU 1 2 BSP FEMALE FOR HILTI DD 160
$170.28
2 PIECES WET CUTTING CORE DRILL OF 52 MM  77 MM FOR WET CORE DRILLING
2 PIECES WET CUTTING CORE DRILL OF 52 MM 77 MM FOR WET CORE DRILLING
$129.00
1 DIAMOND CORE DRILL OF 77 MM  3  DIAMETER FOR WET CUTTING  NEW
1 DIAMOND CORE DRILL OF 77 MM 3 DIAMETER FOR WET CUTTING NEW
$154.80
2 PIECES NEW CORE DRILL EXTENSION SHAFT OF 300MM LONG  SHANK UNC 1 1 4
2 PIECES NEW CORE DRILL EXTENSION SHAFT OF 300MM LONG SHANK UNC 1 1 4
$129.00
2 PIECES DIAMOND CORE DRILL OF 52 MM  77 MM FOR WET CORE DRILLING
2 PIECES DIAMOND CORE DRILL OF 52 MM 77 MM FOR WET CORE DRILLING
$202.80
2 UNITS CORE DRILL ADAPTOR HILTI DD BI TO 1 1 4 UNC FOR HILTI DD 100 DD 120
2 UNITS CORE DRILL ADAPTOR HILTI DD BI TO 1 1 4 UNC FOR HILTI DD 100 DD 120
$149.00
2 PIECES NEW CORE DRILL ADAPTER HILTI DD BS FOR HILTI CORE DRILLING
2 PIECES NEW CORE DRILL ADAPTER HILTI DD BS FOR HILTI CORE DRILLING
$79.00
2 PIECES NEW CORE DRILL EXTENSION SHAFT OF 300MM LONG  SHANK UNC 1 1 4
2 PIECES NEW CORE DRILL EXTENSION SHAFT OF 300MM LONG SHANK UNC 1 1 4
$202.80
2 PIECES NEW CORE DRILL ADAPTOR HILTI DD BL FOR DD 200 DD 250 DD 350
2 PIECES NEW CORE DRILL ADAPTOR HILTI DD BL FOR DD 200 DD 250 DD 350
$130.80
2 PIECES BRAND NEW CORE DRILL ADAPTOR  DD BI TO 1 1 4 UNC 1 2 BSP FOR HILTI
2 PIECES BRAND NEW CORE DRILL ADAPTOR DD BI TO 1 1 4 UNC 1 2 BSP FOR HILTI
$139.00
2 PIECES NEW CORE DRILL ADAPTER  DD BU TO 1 2 BSP FEMALE  FOR HILTI DD 160
2 PIECES NEW CORE DRILL ADAPTER DD BU TO 1 2 BSP FEMALE FOR HILTI DD 160
$99.00
2 PIECES SDS PLUS MASONRY CORE DRILL OF 65MM  77 MM  250MM LONG
2 PIECES SDS PLUS MASONRY CORE DRILL OF 65MM 77 MM 250MM LONG
$430.56


Recently Purchased Drill Core:


1pc hilti core drill adapterfor dd200 dd350 dd500, hilti dd 150u core drill with stand w 3inch bit, concord blades cbw07000sp 7 inch wet concrete diamond core drill bit 7inch, hilti dd250 core drill with stand dd200 and dd vpu vacuum w 5inch bit, hilti 3524639 ddb 416 ps hcs diamond core drill bit concrete industrial, hilti dd80e core drill rig with stand 120v works fine, new bluerock tools 4 z1 core drill 2 speed concrete coring drill new, bluerock z1vb universal vacuum suction base z1vb for concrete core drill stand, hilti 1716 37mm core drill bit new, hilti 34 core drill bit qty 2, hilti ddbi 3 core drill bit, new 4 bluerock tools 4 z1ws core drill 2 speed w stand concrete coring, hilti dd130 core drill, cardi t1800 102muela1 hand held diamond core concrete drill, diamond products core bore cb500 hand held core drill, concord blades cbw05000sp 5 inch wet concrete diamond core drill bit 5inch, 3 diamond vantage dry core bit drill 58 11 thread 10 length cooling holes, 3 diamond vantage dry core bit drill 58 11 thread 5 length cooling holes, steel dragon tools 4 85d wet amp; dry hand held core drill rig for diamond bits, cbw07000sp 7 inch wet concrete diamond core drill bit, steel dragon tools replacement brushes for sdt85 hand held core drill, bosch hc8526 258 x 17 sdsmax rotary hammer drill core cutter bit new, cayken handheld 65 diamond core drill rig 3 gear variable speed 165mm, used hilti ddec1 core drill in case , 35mm 1 38 pro diamond sintered segment hole saw core drills drill pilot bit, coring drill core drill z1 bluerock new 4 z1 coring ll 2 speed new, cayken scy50503c 20 core drill rig with kcy200f aluminum stand, steel dragon tools 3piece 24 wet laser welded diamond core drill bits, steel dragon tools 5piece 26 wet laser welded diamond core drill bits, steel dragon tools 85d with 15 2 4 45 5 dry diamond core drill bits, steel dragon tools 28 wet diamond core drill bits fit hilti milwaukee rigs, steel dragon tools 85d with 15 2 25 dry diamond core drill bits, steel dragon tools 3 76 mm wet diamond concrete core drill bit, steel dragon tools 85d with 15 2 3 5 dry diamond core drill bits, concrete coring drill core drill z1 bluerock new 4 z1 coring ll 2 speed, steel dragon tools 4 102 mm wet diamond concrete core drill bit, bluerock new 4 z1 coring ll 2 speed concrete coring drill core drill z1, 4 blurock 4 z1ws core drill 2 speed w stand new for concrete coring, concord blades cbw03500sp 312 inch wet concrete diamond core drill bit, new 45 diamond wet coring bit for concrete core drill by bluerock tools, new 3 diamond wet coring bit for concrete core drill by bluerock tools, diamond products core bore drill amp; bits, hilti diamond core drill dd100 mec rig with stand amp; wet or dry dd 80 stand, cayken scy26ebm 65 core drill rig with kcy650f adjustable vacuum stand, cayken scy26ebm 65 core drill rig with kcy200f aluminum stand, used husqvarna model dm 220 core drill 584211 jro works well tested, dixie diamond supreme core bit 412 wet core drill bit 165 long made in usa, new 8 core drill concrete coring high quality by bluerock tools model 8z1, hilti 5 bit x 16 ddb 516 high end diamond core drill concrete new in box, 8 z1 core drill concrete coring new bluerock tools package deal, ruko 7pcs hss set of core drills with weldon shank 34 cbn ground 30mm depth, new bluerock 8 z1 core drill concrete coring package deal, 3pcs 16mm 58 inch sintered diamond hole saw drill core bit for marble granite, steel dragon tools 24 core drill bit shaft extension rod for core drilling rig, 3 pieces of 20mm 34 inch thk diamond coated core drill drills , shibuya rh1531 hand held core drill used, hilti core drill dd200 w stand dd200 dd150 , new 4 diamond wet coring bit concrete core drill by bluerock tools, 5 hilti ddc t4 diamond core drill bits concrete abrasive ec1 916 1 118, hilti wet coring drillddec1used gently, steel dragon tools 212 64 mm x 6 dry diamond masonry core drill bit, steel dragon tools 4piece 15 to 5 dry diamond core drill bit kit and case, hilti adapter plate for core drilling stand dd 130, milwaukee dymodrill d214 diamond core drill 1 cap parts repair, drill bit core flat bottom, steel dragon tools 3 76 mm wet diamond concrete core drill bit, steel dragon tools 4 102 mm wet diamond concrete core drill bit, diamond tech core drill bit set, steel dragon tools 5 127 mm wet diamond concrete core drill bit, core drill 4 z1 2 speed concrete coring drill by bluerock tools, heavy duty tct core drill bit power 50mm clean hole drlling mansory cutter diy, new 7 diamond wet coring bit for concrete core drill by bluerock tools, damo 12 drywet diamond core drill bit for concretegranitemarble hole saw, hilti ddb 516 hcs diamond core drill bit concrete new, new 125 diamond wet coring bit concrete core drill by bluerock tools, new 175 diamond wet coring bit concrete core drill by bluerock tools, eibenstock etn 2001 p handheld wetdry 2spd core drill w14 premium core bit, steel dragon tools 4 core drill bit shaft extension rod for core drilling rig, steel dragon tools 412 114 mm x 6 dry diamond masonry core drill bit, cayken scy50503c field 110v fits 20 72hp 530w diamond core drill, cayken scy50503c brushes fits 20 72hp 530w diamond core drill rig, cayken scy50503c armature 110v fits 20 72hp diamond core drill rig, steel dragon tools 7 178 mm wet diamond concrete core drill bit, 110v 110mm diamond core drill concrete core drill machine engineering drill, 1880w water source diamond core drill machine electric concrete core drill 110v, cayken scy182ebm brushes fits handheld 5 25hp diamond core drill



Comments are closed.